Dear Collector,
Thank you for choosing one of my limited edition fine art prints. Your support means more than simply making a purchase. It allows me to continue exploring remote landscapes and sharing the remarkable places and moments that inspire my work.
I hope your new artwork brings you years of enjoyment and becomes a piece that you are proud to display.
Enclosed you will find the Certificate of Authenticity and a matching holographic authenticity sticker. The certificate should be kept in a safe place, as it serves as the permanent record of your artwork's authenticity.
The second holographic sticker is intended to remain with the artwork. I recommend placing it on the back of the print, directly on or adjacent to the printed information panel that includes the title, edition number, size, Limited Edition designation, and my signature. This permanently links the artwork to its Certificate of Authenticity while keeping the front of the piece completely unchanged.
Every limited edition print is produced to museum-quality standards using premium materials and is individually numbered as part of a strictly limited edition.
Thank you again for becoming a collector. It is an honor to have my work displayed in your home or office.
Warm regards,
Greg Westbrook
Traded in my cannon for a Canon.
Utah Fine Art Photographer
gwfine.art
Greg Westbrook Fine Art · gwfine.art
How to Hang Your Metal Print
Simple tools. Secure results. Stunning artwork.
Your metal print arrives ready to hang with a professional cleat mounting system. Every shipment includes the wall cleat, drywall screws, and a mini bubble level. You do not need specialty tools or a complicated bracket kit. What follows is the same four-step process I include with every ChromaLuxe metal piece.
Step 1 — Position the cleat
Decide where you want the print to hang. Hold the wall cleat against the wall at the height you want the top edge of the artwork to sit. Using one of the included drywall screws, drive a screw through the center hole of the cleat. Leave it snug enough that you can still pivot the bar slightly for leveling.
Step 2 — Level the cleat
Place the included mini bubble level on top of the cleat, as shown below. Adjust the bar until it reads level left to right. Take your time here. A level cleat means a level print.
Step 3 — Secure the cleat
Drive screws through the left and right holes to lock the cleat in place. If you prefer, drill small pilot holes first so the screws do not shift the bar as you tighten them. Confirm the cleat is still level before moving on.
Step 4 — Hang the print
Lift the print and slide it onto the wall cleat. The mating bracket on the back of the print hooks over the lip of the wall cleat. Adjust left or right until the piece is centered where you want it.
That is it. Your artwork is securely mounted and ready to enjoy for years to come.
Large prints
If your print is larger than 40" × 60", I strongly recommend drywall anchors for the added weight. Standard drywall screws work well for smaller sizes on typical walls. Anchors are available at any hardware store or online.
Acrylic prints
LumaChrome acrylic prints ship with a similar French cleat system. The wall steps are essentially the same. If you ordered acrylic and want confirmation before you drill, contact us at gwfine.art/pages/contact and I will walk you through it.
Where the specs live
For construction layers, care instructions, packaging, and the full print FAQ, see About the Prints at gwfine.art/pages/about-the-prints. That page is the reference. This one is the installation walkthrough.
New collectors may also find the Collector's Guide helpful. Thank you for supporting independent art and bringing the beauty of the natural world into your space.